The composition of the server rack

Server cabinet, server rack in the depth of the rack, height, weight, etc all have requirements. Height is 2. 0 m, 1. 8 meters, 1. 6 meters three level; Width is 800 mm and 700 mm or 600 mm; A depth of 700 mm and 800 mm and 900 mm.
you can configure: fixed tray, slide the tray, the power supply bracket, castor, shackles, wire ring, wire frame, L bracket, extension, beams, etc. Main body frame, QianHouMen, left and right side door can quick disassembling.
fixed tray: used for all sorts of equipment installation, size is various, wide range of USES, there are 19 'standard pallet, non-standard fixed tray, etc. General configuration of the fixed tray depth 440 mm, 480 mm, 580 mm and 620 mm specifications. The bearing is not less than 50 kg of fixed tray.
slide tray: used to install the keyboard and other equipment, can be easily pull out and back; 19 'standard sliding tray is applicable to any 19' standard cabinet. General configuration of the sliding tray depth 400 mm, 480 mm two specifications. Slide the tray bearing of not less than 20 kg.
power distribution unit: equipped with a power socket, suitable for any of the standard power plug, with 19 'installation, flexible and varied ways. Specification: 6 pins. Parameters: ~ 220 v, 10 amp.
the principle frame: 19 'standard wire frame. Can be used with any type of cabinet. 12 Kong Li wire frame with 12, 24, 48 distribution frame use effect is best.
blind board: blind flange used to shade the 19 'standard cabinet USES, such as free slots have 1 u, 2 u. 。 。 。 。 。 Wait for a variety of specifications. Conventional blind board for 1 u, 2 u two.
extension beams: dedicated to the 1800 series cabinets used device, used to extend the installation of the space inside the cabinet. Installation and removal is very convenient. At the same time also can match reasonable line frame, the installation of power distribution unit. Flexible and varied forms.
installation nut ( The nut) : apply to any cabinets, used for all equipment within the cabinet installation, including installation of cabinet most of the parts.
keyboard tray: used to install a standard computer keyboard, can cooperate with all the specifications of the computer keyboard on the market; Can fold 90 degrees. Keyboard tray must be used with the sliding tray.
speed blower unit: installed on the top of the cabinet, can be adjusted according to the environmental temperature and equipment temperature fan speed, effectively reduce the noise of the machine room.
speed control mode: manual, stepless speed regulation.
frame type fan unit: height is 1 u, can be installed in a 19 'standard rack of arbitrary high position, can according to the heat inside the cabinet as appropriate configuration. All
hole cut in the front door, cabinet door for 3 round hole, improves the performance of radiator cabinet and shielding performance.
highly regular can cooperate: 2. 0 m cabinet, 1. 8 m cabinets, 1. 6 meters cabinet.
NINGBO LONGTU NETWORK TECHNOLOGY CO.,LTD. promises that we will manufature our products in accordance with the strictest quality standards.
Have you been looking for a good charging cart,charge cart,charging trolley,charging station ,network cabinet,server rack laptop charging cart,tablet charging cart,chromebook charging cart,Charging cart in School,36devices charging cart,42U server rack,server cabinet,network cabinet provider? If so, we suggest that you check out NINGBO LONGTU NETWORK TECHNOLOGY CO.,LTD. at TNE Charging cart Network Cabinet charge cart.
NINGBO LONGTU NETWORK TECHNOLOGY CO.,LTD. can assure you that we never compromise on our quality standards and are one of the best in the market at present.
NINGBO LONGTU NETWORK TECHNOLOGY CO.,LTD.'s main technology of charging cart,charge cart,charging trolley,charging station ,network cabinet,server rack leads us to understand and utilize information correctly.
NINGBO LONGTU NETWORK TECHNOLOGY CO.,LTD. employs a numbers of citizens, helping them and their families achieve a higher standard of living.