Rack installation should pay attention to what?

Rack installation need to pay attention to the following:
1, electrical control cabinet must be sealed. Top mounted air conditioner electrical control cabinet of the roof can not be bent, strengthening roof when needed. At the end of the installation to insert one end of the condenser pipe hole was derived, in order to prevent the cooling water flow into the cabinet put oneself in another's position. Now there's a lot of cabinet manufacturers have begun to use condensate rapidly vaporized, in order to exclude condensate. Should be mounted to the door switch, immediately cut off the air conditioner when door open, prevent to avoid to produce any condensation in the cabinet, at the same time, the door is closed again after 5 minutes to air conditioning device is connected. Ark inside air circuit clear, in inlet and outlet can timely eliminate, avoid with other substances.
as the user's requirements more and more high, many customers request electrical control cabinet equipped with air conditioning, now a lot of cabinet manufacturer production of wall and roof type air conditioning, can satisfy the demand of various users.
when the cabinet air circulation inside and outside, also can consider to use heat exchangers, the premise of using this switch is the environment temperature must be lower than the interior of the cabinet temperature, the working principle is to air switch is the same, as long as the cooling medium is water, he devoted to the advantages of the dusty, oil and more heat load. Can adjust the temperature and flow rate of water to change the switch power.